New firmware for Antminer S17/S17pro and T17 by CrMi

[trojanko]

The company is Mining Crazy has developed firmware for ASIC Antminer S17/T17 pro and Antminer. You can already download and install it, make your miner even more powerful !!

We are glad to present you our finished firmware for Antminer S17/S17pro and T17, the results of which are impressive !

Antminer S17 / T17 Overclocking
performance ~+30%
 The possibility of downvolt ~-15-25%
This Antminer S17(normal) to 70-80Th/s (~3100-3760w)
Ant antminer T17 up to 55 th / s (consumption ~ 3000W) (Attention! firmware on T17 works in test mode, in order to avoid breakdowns it is recommended to do overclocking to 45th !)

All firmware comes with Dev Fee 2.8%.

You can download the firmware here:https://asic-firmware.com/firmware-for-antminer-s17-t17-crmi/

 

So, what do you get with our firmware :

Air-cooled overclocking capability up to 80 TH/s for S17 and 55 TH/s for T17

2.Possibility of acceleration on immersion cooling up to 100 TH / s and up to 65 TH / s for T17

3.Current information of each chip (green, orange, red)

4.Overclocking ranges (choose the overclocking option you want)
5.Options for downvolt (reduction of power consumption)

6.Individual overclocking each Board separately (overclocking and voltage)Individual overclocking of each chip ( thanks to this, you can achieve maximum ASIC speed and stable operation)

7.AUTO TUNING (automatic frequency selection + evaluation of chips in automatic mode, increasing the life of the miner)

8.Reducing the number of HW errors than in Bitmain firmwareFunction of switching off of fans at immersion cooling

9.Function create workers + install firmware + transfer config to an unlimited number of miners in the same network at the same time

10.The ASIC BOOST function is installed (reduction of power consumption on average up to 15-25% due to the optimal operation of the ASIC at its current hashrate level)

11.Function of automatic check and destruction of ASIC on viruses and malware ( these cases happen at purchase of the B. U. of the equipment, up to replacement of the control Board of falling of ASIC)

12.Output function of electricity consumption (wattmeter)

13.ASIC search function (blinking Led lights)

14.Mass password change, SSH port and SSH port disconnect function

15.The “sleep mode” function when it is turned on, mining stops and the fans fall to the minimum speed.

16.The ability to disable electricity consumption when resetting the Internet or pool addresses ( on the firmware Bitmain miner continues to consume electricity)

17.Redesigned algorithm of fans (quiet start, maintaining the temperature on the chips, increasing the life of fans)

For support please contact our telegram support channel https://t.me/asicfirmware
So same in contacts telegrams on nicknames : @trojanko, @onizak